| ASCII - Command | EN22CNFG | |||
| Syntax Transmit | EN22CNFG [Data] | |||
| Syntax Receive | EN22CNFG <Data> | Available in | ||
| Type | Variable rw | MMI | No | |
| ASCII Format | Integer16 | CANBus Object Number | 390F (hex) | |
| DIM | - | PROFIBUS PNU | 1839 (dec) IND = 33 (dec) | |
| Range | 0 .. 3 | DPR | 1039 (dec) | |
| Default | 1 | |||
| Opmode | All | Data Type Bus/DPR | Integer16 | |
| Drive State | Disabled + Reset (Coldstart) | Weighting | ||
| Start Firmware | 5.91 | |||
| Configuration | Yes | Last Change of this Object | 2.13 | |
| Function Group | feedback | EEPROM | Yes | |
| Short Description | Config.parameter for ENDAT 2.2 additional information | |||
Description
| This parameter is a bit variable. Setting a bit activates the reading of the corresponding ENDAT2.2 additional information. Bit 0 = 1 Reading in the diagnostic information (evaluation values) Bit 1 = 1 Reading the additional information 1 Bit 2 = 1 Reading the additional information 2 Setting a bit to 0 inhibits the reading of the associated additional information |