| ASCII - Command | SOFTOUT | |||
| Syntax Transmit | SOFTOUT [Data] | |||
| Syntax Receive | SOFTOUT <Data> | Available in | ||
| Type | Variable ro | MMI | No | |
| ASCII Format | Integer32 | CANBus Object Number | 354F (hex) | |
| DIM | - | PROFIBUS PNU | 1679 (dec) IND = 1 (dec) | |
| Range | Integer32 | DPR | 79 (dec) | |
| Default | 0 | |||
| Opmode | All | Data Type Bus/DPR | Integer32 | |
| Drive State | - | Weighting | ||
| Start Firmware | 1.00 | |||
| Configuration | No | Last Change of this Object | 1.3 | |
| Function Group | digital I/O | EEPROM | No | |
| Short Description | State variable for the virtual digital Outputs | |||
Description
The bit variable SOFTOUT describes the actual state of the virtual digital outputs OUTPUT3 … OUTPUT18 The relation between the Bit number and the digital output is as follows: Bit0 OUTPUT3 Bit1 OUTPUT4 …. BIT15 OUTPUT18 The function of the virtual digital outputs can be configured by the commands O3MODE…O18MODE In case that an external I/O slot card is used, only a reduced number of virtual outputs is available OUTPUT11…OUTPUT18) |