| ASCII - Command | SOFTIN | |||
| Syntax Transmit | SOFTIN [Data] | |||
| Syntax Receive | SOFTIN <Data> | Available in | ||
| Type | Variable rw | MMI | No | |
| ASCII Format | Integer32 | CANBus Object Number | 354E (hex) | |
| DIM | - | PROFIBUS PNU | 1678 (dec) IND = 1 (dec) | |
| Range | Integer32 | DPR | 78 (dec) | |
| Default | 0 | |||
| Opmode | All | Data Type Bus/DPR | Integer32 | |
| Drive State | - | Weighting | ||
| Start Firmware | 1.00 | |||
| Configuration | No | Last Change of this Object | 2.14 | |
| Function Group | digital I/O | EEPROM | No | |
| Short Description | Input variable for digital software inputs INPUT5…INPUT20 | |||
Description
| The bit variable SOFTIN describes the actual state of the virtual digital inputs INPUT5 … INPUT20 The relation between the Bit number and the digital input is as follows: Bit0 INPUT5 Bit1 INPUT6 …. Bit15 INPUT20 The write access to the parameter SOFTIN affects directly the state of the corresponding digital input For example: SOFTIN 5 : the digital inputs INPUT5 and INPUT7 becomes the state high The function of the virtual digital inputs can be configured by the commands IN5MODE…IN20MODE In case that an external I/O slot card is used, only a reduced number of virtual inputs is available (INPUT19…INPUT20) |